Rega Planar 1 Turntable with Rega io amplifier and Fyne Audio F300 speakers

Regular price £827.00 GBP.
/
Tax included. Shipping calculated at checkout.

Only -1 items in stock!

The perfect bundle for a first time turntable user. 

Rega Planar 1

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.

Performance beyond price 
Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable from the ground up.

If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.

Performance beyond price 
Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable from the ground up.

If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.

Rega io 

Rega io - Stereo integrated amplifier – Designed and handmade in England, delivering unmatched build quality and audio performance at a truly unbeatable price.

The all new io amplifier is designed with every music lover in mind. Simple to setup and operate the io is designed to integrate seamlessly into any hi-fi system.

The compact size allows it to be used in a variety of systems and delivers a performance well beyond its price point. As you would expect, there is a high quality built in moving magnet phono stage, two line level inputs, a new design remote control handset and high quality headphone output that is cleverly integrated to deliver optimum performance without compromising the audio circuit. All of these features combine to deliver a powerful, well balanced musical performance at an incredible price.

 Fyne F300

Packing a punch well beyond its diminutive size the versatile F300 bookshelf speaker can be used for two channel Hi-Fi or home theatre applications. Pre-fitted to the rear panel of the F300 is a bracket allowing the speaker to be easily flush-mounted to a wall. This is a really handy feature where space is at an absolute premium, or for using the speaker as a rear effects speaker in home cinema set up.

 

 

Specifications

 Fyne F300 Specifications

System Type 2 way, rear ported
Recommended amplifier power (Watt RMS) 20 - 70
Continuous power handling (Watt RMS) 35
Sensitivity (2.83 Volt @ 1m) 87dB
Nominal impedance 8 Ohm
Frequency response (-6dB typical in room) 54Hz- 28kHz
Drive unit complement 1 x 125mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
Crossover frequency 3.4kHz
Crossover type 2nd order low pass, 3rd order high pass
Dimensions - HxWxD 250 x 156 x 211mm (9.8 x 6.1 x 8.3”)
Weight - Each 3.7kg (8.2lb)
Finishes Walnut / Black Ash / Light Oak

 


Planar 1 Specifications

Plug and Play design, set-up in less than thirty seconds.  
Hand assembled RB110 tonearm.  
High quality, low vibration motor. 
Phenolic resin, flywheel effect platter.  
Factory fitted Carbon moving magnet cartridge.

Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm

Weight 4.2kg

 

Rega io Specifications

Power outputs at 230/115 V supply voltage
30 W RMS both channels driven into the rated load of 8 Ω

Input 1 (Phono) input sensitivity 2.1 mV @ 47 kΩ in parallel with 220 pF
Maximum input 1 (Phono) input level 100 mV
Input 2-3 (Line) input sensitivity 210 mV @ 47 kΩ
Maximum input 2-3 (Line) input level 10.25 V

Headphone output
No load 8 V
32 Ω 1.6 V
54 Ω 2.4 V
300 Ω 5.7 V
Source impedance: 109 Ω

Power consumption
135 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 8 Ω

Frequency response
Phono: 15 Hz to 40 kHz (-3 dB points) / 27 Hz to 20.5 kHz (-1 dB points)

RIAA accuracy: (100Hz to 10 kHz) ±0.4 dB typically better than ±0.3 dB

Line: 12 Hz (-1 dB points) to 43 kHz (-3 dB points)

Remote control
Batteries included –2 x AAA Alkaline.

Fuse ratings
T1.6 AL 250 V: 230 V / 50Hz and 220 V / 60 Hz
T3.15 AL 250 V: 115 V / 60 Hz and 100 V / 50/60 Hz

Weight
2.9Kg

Dimensions (W x D x H) in mm
180 x 290 x 68