Rega Planar 1
The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.
Performance beyond price
Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable from the ground up.
If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.
Rega io - Stereo integrated amplifier – Designed and handmade in England, delivering unmatched build quality and audio performance at a truly unbeatable price.
The all new io amplifier is designed with every music lover in mind. Simple to setup and operate the io is designed to integrate seamlessly into any hi-fi system.
The compact size allows it to be used in a variety of systems and delivers a performance well beyond its price point. As you would expect, there is a high quality built in moving magnet phono stage, two line level inputs, a new design remote control handset and high quality headphone output that is cleverly integrated to deliver optimum performance without compromising the audio circuit. All of these features combine to deliver a powerful, well balanced musical performance at an incredible price.
Fyne Audio F301
Perfect for smaller listening rooms, the F301 is a compact, standmount or bookshelf loudspeaker offering outstanding flexibility and class leading performance. As Hi-Fi stereo pair, the F301 excels at delivering dynamic bass and the musical articulation of more expensive designs. Its high current handling is equally at home in home theatre systems where the F301’s easy to drive nature and deep bass punch are compatible with a wide range of AV amplifiers and receivers.
Fyne F301 Specifications
|2 way, rear ported|
|Recommended amplifier power (Watt RMS)||25- 100|
|Continuous power handling (Watt RMS)||50|
|Sensitivity (2.83 Volt @ 1m)||89dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||44Hz- 28kHz|
|Drive unit complement||1 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter|
|Crossover type||2nd order low pass, 3rd order high pass|
|Dimensions - HxWxD||300 x 190 x 271mm (11.8 x 7.5 x 10.7”)|
|Weight - Each||5.3kg (11.7lb)|
|Finishes||Walnut / Black Ash / Light Oak|
Planar 1 Specifications
Plug and Play design, set-up in less than thirty seconds.
Hand assembled RB110 tonearm.
High quality, low vibration motor.
Phenolic resin, flywheel effect platter.
Factory fitted Carbon moving magnet cartridge.
Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm
Rega io Specifications
Power outputs at 230/115 V supply voltage
30 W RMS both channels driven into the rated load of 8 Ω
Input 1 (Phono) input sensitivity 2.1 mV @ 47 kΩ in parallel with 220 pF
Maximum input 1 (Phono) input level 100 mV
Input 2-3 (Line) input sensitivity 210 mV @ 47 kΩ
Maximum input 2-3 (Line) input level 10.25 V
No load 8 V
32 Ω 1.6 V
54 Ω 2.4 V
300 Ω 5.7 V
Source impedance: 109 Ω
135 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 8 Ω
Phono: 15 Hz to 40 kHz (-3 dB points) / 27 Hz to 20.5 kHz (-1 dB points)
RIAA accuracy: (100Hz to 10 kHz) ±0.4 dB typically better than ±0.3 dB
Line: 12 Hz (-1 dB points) to 43 kHz (-3 dB points)
Batteries included –2 x AAA Alkaline.
T1.6 AL 250 V: 230 V / 50Hz and 220 V / 60 Hz
T3.15 AL 250 V: 115 V / 60 Hz and 100 V / 50/60 Hz
Dimensions (W x D x H) in mm
180 x 290 x 68
Pop your email address below and we'll keep you up to date with the latest interesting products from the AV world.