Anthem Statement M1 Mono Power amplifier
- UK Wide Shipping Available
- Long established Official Retailer
- Usually in-stock ready to ship
Please contact us regarding Stock availability
The highest sound quality at all volume levels, flat frequency response into any load, and stable into the most difficult loads. 10,000 watts of peak power available. The Statement M1 is a state-of-the-art monaural amplifier delivering 1,000 watts into 8 ohms and 2,000 watts into 4 ohms or less with THD remaining under 0.1% from 20 Hz to 20 kHz. Designed and engineered in our advanced research center in Ottawa, Canada, the M1 is manufactured in our Toronto facility.
More than just a slim, technologically advanced monaural design, the M1 demonstrates that Class D architecture isn't fundamentally flawed, it simply hasn't been implemented well in the past, mainly because it required such a heavy commitment to R&D. We’re fortunate to have the in-house resources to create such a groundbreaking product and one listen will reveal the truly extraordinary nature of this amplifier.
Specifications
| Power Output continuous, 20 Hz to 20 kHz, <0.1% THD+N | |
| 8 Ω | 1000 W |
| 4 Ω | 2000 W |
| 3 Ω | 2400 W |
| 2 Ω | >2000 W depending on line voltage regulation |
| With 120V AC supply the amplifier’s maximum output into impedances 4 Ω and lower, as well as its maximum duration, vary depending on line voltage regulation. | |
| Frequency Response 20 Hz to 20 kHz | |
| Open circuit | +/- 0.1 dB |
| 8 Ω | +/- 0.1 dB |
| 4 Ω | +/- 0.1 dB |
| 2 Ω | +/- 0.2 dB |
| Power Bandwidth 1000 W at 8 Ω | 5 Hz to 45 kHz |
| THD+N at 1 kHz, 8 Ω | |
| 1 W | 0.01 % |
| 10 W | 0.01 % |
| 100 W | <0.03 % |
| 1000 W | <0.06 % |
| IMD 19 kHz + 20 kHz, CCIF | 0.003% |
| S/N Ratio ref. 1000 W, IEC-A | 113 dB |
| Voltage Gain | 29 dB |
| Input Sensitivity | 100 mV for 1 W output, 3.2 V for 1000 W output (8 Ω) |
| Input Impedance | 10 kΩ (RCA), 20 kΩ (XLR) |
| Damping Factor | 800 to 1400 depending on frequency |
| XLR Configuration | Pin 1: Ground, Pin 2: Positive, Pin 3: Negative |
| POWER REQUIREMENTS | |
| Consumption in a typical music/theater installation | |
| standby mode, 120V mains | <1 W |
| standby mode, 240V mains | <2 W |
| operate mode, idle | 33 W |
| typical operation | 300 W |
| Where mains voltage is 120V, one dedicated 15A circuit per amplifier is recommended depending on speaker. A 20A circuit is adequate for two amplifiers playing music where speaker impedance is 8 Ω. This product operates from a single phase AC power source that supplies between 108V and 264V at a frequency of 50 or 60 Hz. | |
| DIMENSIONS | |
| Height with feet | 2 1/4 inches (5.7 cm) |
| Height without feet | 1 rack unit |
| Width standard handles | 19 1/4 inches (49 cm) |
| Width rackmount handles | 19 inches (48.3 cm) |
| Depth | 18 3/4 inches (47.6 cm) |
| Weight (unpacked) | 20 lb (9 kg |
Shipping options vary depending on the brand and or size, weight etc of the product. We utilise reputable couriers to ensure your products are delivered as quickly as is possible and safely. For more information please don't hesitate to get in touch with a team member.
Some products will ship from our stock whilst some products are made to order or will ship directly from the manufacturer. These products are labeled "direct from manufacturer"
