Dali Spektor Vokal
Taking centre stage is the Dali Spektor Vokal. Delivering clarity and depth to any movie with two 4½” woofers and 25 mm soft dome that are set up to match perfectly with any of the three models in the Spektor series.
Wood Fibre Cones
Dali's low-loss drivers use a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimises the resonance of the surface. This creates the best possible reproduction of very detail in the audio signal.
The amplifier friendly design of the Spektor Vokal makes it the perfect fit for almost any of the amplifiers in its price category.
Soft Dome Tweeter
The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from Dali's high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).
Low Signal Loss
By using only Dali-designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables Dali to design an exact crossover that together with carefully selected quality components ensures that the signal loss is close to zero.
|Frequency Range (+/-3 dB) [Hz]||66 - 26,000 Hz|
|Sensitivity (2,83 V/1 m) [dB]||87.0 dB|
|Nominal Impedance [ohms]||6 ohms|
|Maximum SPL [dB]||107 dB|
|Recommended Amplifier Power [W]||40 - 120 Watt|
|Crossover Frequency [Hz]||2,100 Hz|
|High frequency driver, Quantity||1 x 25 mm|
|High frequency driver, Diaphragm type||Soft Textile Dome
|Low frequency driver, Quantity||2 x 4,25"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone
|Enclosure type||Bass Reflex
|Bass Reflex Tuning Frequency [Hz]||51.5 Hz|
|Connection Input||Single Wire
|Recommended Placement||Shelf or stand
|Recommended Distance From Wall [cm]||1 - 50 cm|
|Dimensions (HxWxD) [mm]||152 x 435 x 204 mm|
|Accessories Included||Rubber Feet
|Weight [kg]||5.3 kg|