Pro-Ject Maia S3 Integrated Amplifier
- UK Wide Shipping Available
- Long established Official Retailer
- Usually in-stock ready to ship
The New MaiA S3
The MaiA S3 is the all in one solution for your hifi system. Not only the circuit design was reworked, also the case has been significantly changed and the MaiA S3 uses our new S3 case. Due to the bigger size we were able to improve the circuit board layout in terms of electromagnetical interference. With its 8 inputs you are ready for any kind of source device.
Versatile and Compact
The MaiA S3 offers eight inputs. Ready for digital or analog sources, wired or wireless – you’re covered. The phono section can handle MM, MI, or high output MC cartridges. Hook up your tuner or any other analog device to one of the three line-level RCA inputs. The DAC section allows a coax and two optical connections. The high definition aptX™ HD Bluetooth 5.0 wireless input allows streaming your favorite music via your phone.
MaiA S3 Specifications |
|
| Power output: | 2x 23W / 40W at 8 / 4ohms (1% THD) |
| Frequency response (20Hz - 20kHz): | <-0,5dB @4ohm |
| Channel separation: | - 69dB at 10kHz |
| Signal to noise ratio: | 97dB (101dB-‚A‘ weighted) @4ohm |
| THD: | < 0,04% at 10W / 4 ohms |
| Headphone amplifier: | 2x 75mW at 32ohm (1%THD) |
| Headphone output: | 6,3mm jack (16 – 600ohms) |
| Analogue inputs: | 3x pair RCA, 1x phono MM (RCA) |
| Digital inputs: | RCA coax, 2 x Toslink, Bluetooth 5.0 (aptX) |
| D/A-converter: | Cirrus Logic CS4344 24bit/192kHz |
| Variable output: | 1x pair RCA |
| Speaker connectors: | 4mm Ø banana plugs, spades connectors or naked wire |
| Power supply: | 20V/3A DC;100 - 240V, 50/60Hz |
| Standby Power consumption: | < 0,5 watts |
| Dimensions WxHxD: | 206x55x153 (176mm with sockets) |
| Battery remote control: | 1 x CR2032 / 3V or CR2025 / 3V |
| Weight: | 1070 g without power supply |
Versatile In & Outputs
Phono, Line, Digital, Bluetooth 5.0
Use your favourite headphones or connect your speakers with the 4mm banana plugs and the low noise amplifier will do the rest. The variable RCA output also allows you to include a subwoofer in your setup.
aptX™ HD
Bluetooth 5.0
aptX™ HD with our new Bluetooth 5.0 chip will allow you convenient high resolution streaming from your smartphone.
Handmade in EU
Since 1991
Made in Europe by technicians, engineers and designers with decades of experience. Expert craftsmanship. Sustainable products with a long lifetime. Audiophile audio performance.
Shipping options vary depending on the brand and or size, weight etc of the product. We utilise reputable couriers to ensure your products are delivered as quickly as is possible and safely. For more information please don't hesitate to get in touch with a team member.
Some products will ship from our stock whilst some products are made to order or will ship directly from the manufacturer. These products are labeled "direct from manufacturer"
