Rega Aethos Amplifier
The Aethos stereo amplifier is housed in a brand new custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 Ω. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible. The Aethos has been built to Rega’s high standards of reliability and quality to ensure many years of musical enjoyment.

Dali Rubicon 6
RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.
The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.
The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.
Specifications
Rega Aethos Specifications
Power outputs at rated 230/115 V supply voltage:
125 W RMS both channels driven into the rated load of 8 Ω
156 W RMS both channels driven into 6 Ω
Headphone output:
No load 12.5 V
32 Ω 2.7 V
54 Ω 4 V
300 Ω 9 V
Source impedance 109 Ω
Record output:
Record output level (with rated input levels) 219 mV
Record output impedance 560 Ω
Pre-amp output:
Pre-amp output level (with rated input levels) 840 mV
Pre-amp output impedance 100 Ω
Input sensitivities for rated output level:
Input 1-5 and record input sensitivity 224 mV @ 17 kΩ
Maximum input level 11.5 V (record output amplifier overload point)
Direct input sensitivity 840 mV @ 50 kΩ
Power amplifier gain 31.6 dB
Frequency response @ 100 W into 8 Ω:
Line input 1-5 and record 10 Hz (-0.8 dB point) to 30 kHz (-0.5 dB point)
Direct input 10 Hz (-0.8 dB point) to 50 kHz (-0.5 dB point)
THD+Noise @ 100 W into 8 Ω:
Direct input (Power amplifier only) Typically 0.007% @ 1kHz (measurement bandwidth 22 Hz to 30 kHz)
Line input Typically 0.007% @ 1kHz (measurement bandwidth 22Hz to 30KHz)
Power consumption Maximum output: 415 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 124 W RMS into 8 Ω
Fuse ratings T5 AL 250 V - 230 V/ 50 Hz and 220 V / 60 Hz
T8 AL 250 V - 115 V / 60 Hz and 100 V 50/60 Hz
Dimensions W 433 mm x H 95 mm x D 360 mm (including speaker terminals)
Weight 17.5 kg
Dali Rubicon 6 Specifications
Product series |
RUBICON |
Frequency Range (+/-3 dB) [Hz] |
38 - 34.000 |
Sensitivity (2,83 V/1 m) [dB] |
88.5 |
Nominal Impedance [ohms] |
4 |
Maximum SPL [dB] |
110 |
Recommended Amplifier Power [W] |
40 - 200 |
Crossover Frequency [Hz] |
800 / 2,600 / 14,000 |
Crossover Principle |
2½ + ½-way |
Hybrid tweeter module, Super high freq. driver, Quantity |
1 x 17 x 45 mm |
Hybrid tweeter module, Super high freq. driver, Diaphragm type |
Ribbon
|
Hybrid tweeter module, High frequency driver, Quantity |
1 x 29 mm |
Hybrid tweeter module, High frequency driver Diaphragm type |
Soft Textile Dome
|
Low frequency driver, Quantity |
2 X 6½" |
Low frequency driver, Diaphragm type |
Wood Fibre Cone
|
Enclosure type |
Bass Reflex
|
Bass Reflex Tuning Frequency [Hz] |
33.5 |
Connection Input |
Bi-Wiring
|
Magnetic Shielding |
No |
Recommended Placement |
Floor
|
Recommended Distance From Wall [cm] |
20 - 180 |
Dimensions With Base (HxWxD) [mm] |
990 x 200 x 380 |
Accessories Included |
Manual Micro Fibre Cloth Rubber Bumpers Spikes M8
|
Weight [kg] |
20.2 |