Audio Technica VM760SLC MM Cartridge
- UK Wide Shipping Available
- Long established Official Retailer
- Usually in-stock ready to ship
- Inventory on the way
Audio Technica VM760SLC
Dual Moving Magnet Stereo Cartridge
With the use of an ultra-lightweight stylus tip ground to a high level of precision, Audio Technica have achieved a combination of low distortion rates with fuller frequency reproduction during playback.
This stylus tip extracts every possible piece of information from the grooves on a record.
- Aluminium tapered cantilever
- Para-toroidal coils improve generating efficiency
- Centre shield plate between the left and right channels reduces crosstalk
- Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield
Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
Top-end model fitted with the die-cast aluminium alloy housing. The body reduces the unwanted vibration and enhances the superior sound quality of high-performance line contact styli.
|Cartridge & Stylus
|20 - 30,000Hz
|Vertical Tracking Angle
|Nude Rectangular Shank
|Recommended Load Impedance
|4.0mV (1kHz, 5cm/sec.)
|Output Channel Balance
|Special Line Contact
|Aluminium Tapered Pipe
|40 x 10-6 cm/dyne
|10 x 10-6 cm/dyne (100Hz)
|17.3 (H) x 17.0 (W) x 28.2 (L) mm
|Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1
|Recommended Load Capacitance
|100 – 200pF
|0.28 x 1.5 mil