Dynavector XX 2 II Low-Output Moving Coil Cartridge
- UK Wide Shipping Available
- Long established Official Retailer
- Usually in-stock ready to ship
- Inventory on the way
DYNAVECTOR XX 2 II (MC) LOW OUTPUT MOVING COIL
The DV XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.
The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.
The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.
The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.
For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.
SPECIFICATIONS
Type | Low output moving coil cartridge with Alnico magnet and Flux damper |
Output Voltage | 0.28mV (at 1KHz, 5cm/sec.) |
Channel Separation | 30 dB (at 1KHz) |
Channel balance | 1.0 dB (at 1KHz) |
Frequency response | 20 - 20,000Hz (± 1dB) |
Compliance | 10 mm/N |
Tracking force | 1.8 - 2.2 g |
Impedance | 6 ohms |
Recommended load impedance | > 30 ohms |
Cantilever | 6mm length 0.3 mm dia. solid boron |
Stylus tip | PF Line contact shape, stylus radius: 7 x 30 micron |
Weight | 8.9 g |
Shipping options vary depending on the brand and or size, weight etc of the product. We utilise reputable couriers to ensure your products are delivered as quickly as is possible and safely. For more information please don't hesitate to get in touch with a team member.
Some products will ship from our stock whilst some products are made to order or will ship directly from the manufacturer. These products are labeled "direct from manufacturer"